瑞士WATROMAT各類污泥干燥機及運輸系統概述

標準污泥干燥機

WATROMAT®批處理污泥脫水機使用干燥的空氣，以減少濾餅污泥的重量和體積。污泥干燥WATROMAT®批處理污泥烘干機是中小型板框壓濾機污泥濾餅的理想選擇。濾餅污泥被填充到WATROMAT®干燥容器中，將用干空氣干燥。干燥所有WATROMAT®容器集成的引爆系統。污泥干燥與WATROMAT®標準的污泥干燥機是維護窮人和無排放。

特點和優點
干60 - 4000公斤污泥/天
需要分鐘。固含量為30％的干燥
使用00:33千瓦時電，每公斤分離出的水
達到90％的固體干燥

箱式污泥干燥機

WATROMAT®容器污泥脫水機半連續降低濾餅污泥的體積和重量與干燥后的空氣在大跳過或鉤升降機容器。 WATROMAT®容器污泥干燥機適用于大型板框壓濾機污泥干化。站立在壓濾機，濾餅將干燥污泥落入WATROMAT®干燥的跳動或WATROMAT®鉤升降機容器和干燥。
WATROMAT®容器的污泥烘干機工作原理完全自動的，不需要任何處理，直到容器裝滿干污泥。

數字和功能
每個集裝箱每天枯竭噸至20噸的污泥
需要分鐘。 25％的固體干燥
使用00:33千瓦時電，每公斤分離出的水
達到90％的固體干燥

帶式污泥干燥機

WATROMAT®帶式污泥干燥機采用的烘干隧道和空調，空氣干燥，減少污水污泥儲存的體積和重量。 WATROMAT®帶式污泥干燥機適用于污水污泥脫水帶式壓濾機離心機，沉降或螺旋壓力機。污水污泥將被分配到一個穿孔帶，慢慢地經過一個隧道污泥運，輕輕地干燥，干燥的空氣條件。 WATROMAT®帶式污泥干燥機在封閉系統中的無排放，無異味。

干污泥運輸系統

WATROMAT®，干污泥裝袋單元采用高壓風機，干污泥輸送到單向袋?？誛ATROMAT®干污泥的干燥容器不使用叉式起重適合干污泥裝袋單元。污泥件要與真空無塵吸走。干污泥裝袋機配備灰塵過濾器自清潔單元工作免維護。

特點和優點
從800 - 10,000公斤/小時的干污泥運輸
替換叉車（SF800. SF1400）
降低存儲量

Standard sludge dryer

WATROMAT® batch sludge dryer use dried air to reduce the weight and volume of filter cake sludge. Sludge drying with WATROMAT® batch sludge dryers is ideal for filter cake sludge from small and medium plate and frame filter presses. The filter cake sludge is filled into WATROMAT® drying containers and will be dried with dry air. All WATROMAT® drying containers have integrated tipping systems. Sludge drying with WATROMAT® standard sludge dryer is maintenance-poor and emission-free.

Features and benefits
Dry 60 – 4000 kg sludge/day
Needs min. 30 % dried solids
Use 0.33 kWh power per kg separated water
Reach 90 % dried solids

Container sludge dryer

WATROMAT® container sludge dryer reduces the volume and weight of filter cake sludge semi-continuously with dried air in big skips or hook lift containers. Sludge drying with WATROMAT® container sludge dryer suits for large plate and frame filter presses. The filter cake sludge fall into WATROMAT® drying skips or WATROMAT® hook lift drying containers and will be dried during standing under the filter press.
WATROMAT® container sludge dryers works fully automatic and don't need any handling till the container is filled with dried sludge.

Figures and features
Dries up to 20 t sludge per day per container
Needs min. 25 % dried solids
Use 0.33 kWh power per kg separated water
Reach 90 % dried solids

Belt sludge dryer

WATROMAT® belt sludge dryer uses a drying tunnel and conditioned dried air to reduce sewage sludge storage volume and weight. WATROMAT® belt sludge dryer is suited for sewage sludge dewatered by belt filter press, centrifuge, decanter or screw press. Sewage sludge will be distributed on a perforated belt, transported slowly through a sludge tunnel, and softly dried by conditioned dry air. WATROMAT® belt sludge dryer works in an emission free closed system and without odour.

Dry sludge transport system

WATROMAT® dry sludge bagging unit uses high pressure fan to transport dried sludge into one way bag. Dry sludge bagging unit is suited to empty WATROMAT® drying containers holding dry sludge without using a fork-lift. The sludge pieces will sucked away with a vacuum dust free. The dry sludge bagging unit is equipped with a self-cleaning dust filter unit that works maintenance free.

Features and benefits
Transports from 800 – 10,000 kg/hour dried sludge
Replaces fork-lift truck (SF800. SF1400)
Reduces storage volume